Tips to Test a Button Battery6001119
Button battery is recognized as a little battery which is generally utilized to power the small electronic devices. This button battery gets its name simply because it is round and resembles buttons or coins. Numerous individuals are really not really familiar with this quite new kind of battery. When you are getting electronic device which stops operating, it might be brought on by a easy matter of the dead or dying button battery. At this time, this article is going to give you some suggestions of a testing method for the button battery that will assist you to check its situation.
As the first step, you should remove the battery from your device and then you need to inspect it for determining the battery voltage. The voltage is generally marked on the battery. It is known that most of the button batteries are produced in between 1.35 and 3 volts.
As the second step, you require to set the multimeter for displaying the voltage on the DCV scale.
The third step that you should do is to determine the positive side of your battery by discovering side with a "+" that marked on it. Following that, you need to touch the good probe of multimeter (red) anywhere on this side.
The fourth step is to touch unfavorable probe of multimeter (black) to the negative side of your battery. The unfavorable side is of course in the opposite side of the positive side.
The last step is to take a note of the voltage that is displayed on the multimeter. If you discover that the voltage is about ten % much less than the marked voltage on battery, you require to replace it. For instance, the 1.five battery must show the voltage of at least 1.35 volts, while the three volts battery should show the voltage of at least 2.7 volts.